ABSOLUTE Digimatic Bore Gage Series 511

Series 511
Features
  • The minimum value holding function provides the easy detection of hole diameter.
  • Up to three sets of master value and upper/lower tolerance value can be memorized.
  • An analog bar indicator is integrated to enhance the intuition in reading.
  • GO/±NG judgment is performed by setting the upper and lower tolerances.
  • Up to four rods (250mm or 500mm) can be used.

Technical Data

Accuracy: Wide Range: 0.003mm/.00012”
Narrow Range:0.002mm/.00008” Resolution:.00005"/0.001mm
Display:LCD
Battery: SR44 (1 pc.)(938882)
Battery life:Approx.9 months for normal use
Dust/Water protection level: Conforming to IP53


Functions

Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only),
Data output, GO/±NG tolerance judgment
Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error


Optional Accessories

21DZA089:Extension rod 250mm (10")
21DZA081:Extension rod 500mm (20")
516-118-10:Origin setup metric rectangular gage block set
516-119-10:Origin setup metric square gage block set
516-120-26:GB calibration kit for series 511 bore gage.
                    (9 pcs GB and plain jaw, 160mm holder)
905338:SPC cable (1m)
905409:SPC cable (2m)



Parts Break Down


 

Inch/Metric
Order NoImageRangeProbe
511-521511-521.jpg1.8-4in 45-100mm6 in 152.4mm
511-522-4-6.5in 100-160mm6" 152.4mm
Pages: 1    
line drawings