Bore Gages- Series 511-Standard Type

Series 511
Features
Mitutoyo offers a complete selection of Bore Gages,all of them with interchangeable anvils and necessary accessories to perform close tolerance ID measurements.
  • Most popular Bore Gages.
  • Carbide-tipped contact points for durability.
  • The dial indicator is fully protected by a rugged cover.
  • Optional extension rods can be attached for measuring deep holes.

Technical Data

Accuracy: 5µm / .0002”
Indication stability: 2µm / .00008”
Graduation: 0.01mm, 0.001mm, .0005" or .0001"

Optional Accessories
953549: 125mm / 4.92” Extension rod for 18-35mm / .7 -1.4" models
953552: 125mm / 4.92” Extension rod for 35-160mm / 1.4 - 6.5" models
953557: 125mm / 4.92” Extension rod for 160-400mm / 6.5 - 16" models
953550: 250mm / 9.84” Extension rod for 18-35mm / .7 - 1.4" models
953553: 250mm / 9.84” Extension rod for 35-160mm / 1.4 - 6.5" models
952361: 250mm / 9.84” Extension rod for 160-400mm / 6.5 - 16" models
953551: 500mm / 19.69” Extension rod for 18-35mm / .7 - 1.4" models
953554: 500mm / 19.69” Extension rod for 35-160mm / 1.4 - 6.5" models
953558: 500mm / 19.69” Extension rod for 160-400mm / 6.5 - 16" models
953555: 750mm / 29.53" Extension rod for 35-160mm / 1.4 - 6.5" models
953559: 750mm / 29.53” Extension rod for 160-400mm / 6.5 - 16" models
953556: 1000mm / 39.37” Extension rod for 35-160mm / 1.4 - 6.5" models
953560: 1000mm / 39.37” Extension rod for 160-400mm / 6.5 - 16" models

InchMetric
Order NoImageRangeTypeAnvilsSpacers
511-731511-731.jpg.7-1.4inWithout Indicator92
511-732511-732.jpg1.4-2.5inWithout Indicator64
511-733511-733.jpg2-6inWithout Indicator11/2 in Sub-anvil4
511-734-4-6.5inWithout Indicator134
511-735-6.5-10inWithout Indicator67
511-736-10-16inWithout Indicator57
511-741511-741.jpg.7-1.4inWith 2922SB Grad .0005in92
511-742511-742.jpg1.4-2.5inWith 2922SB Grad .0005in64
511-743511-743.jpg2-6inWith 2922SB Grad .0005in11/2 in Sub-anvil4
511-744-4-6.5inWith 2922SB Grad .0005in134
511-745511-745.jpg6.5-10inWith 2922SB Grad .0005in67
511-746511-746.jpg10-16inWith 2922SB Grad .0005in57
511-751511-751.jpg.7-1.4inWith 2923SB-10 Grad .0001in92
511-752511-752.jpg1.4-2.5inWith 2923SB-10 Grad .0001in64
511-753511-753.jpg2-6inWith 2923SB-10 Grad .0001in11/2 in Sub-anvil4
511-754511-754.jpg4-6.5inWith 2923SB-10 Grad .0001in134
511-755511-755.jpg6.5-10inWith 2923SB-10 Grad .0001in67
511-756511-756.jpg10-16inWith 2923SB-10 Grad .0001in57
Pages: 1    
line drawings